FacebookTwitterLinkedinYoutubeWhatsappWhatsapp
Share

PIR Motion sensor is optimized for offices and corridors

////PIR Motion sensor is optimized for offices and corridors

The VAC-Circumat+ motion detector captures invisible infrared emissions from humans and other heat sources without emitting any type of radiation. The device lights up when the heat source moves within its detection range. Once the movement is stopped, it turns off after an adjustable delay time. VAC-Circumat+ circuit reacts only if the light conditions are below the chosen level. Another feature is that the VAC-Circumat+ motion detector is a ceiling surface mounted with basic functions for most applications. Compensation from outside temperature provides more precise detection. With its special pulse function of 1 s, ON / 9 s OFF. 

Applications of PIR Motion Sensor, model no. VAC-Circumat+:

 The PIR Motion sensor, model no. VAC-Circumat+ is useful for the following applications:

  1. It is suitable for offices.
  2. It is used for box room and restrooms.
  3. It is used for halls and corridors.
  4. It is used for landings.
  5. It is used for most indoor applications.

Features of PIR Motion sensor, model no. VAC-Circumat+:

  1. It is best suited for ceiling surface installation.
  2. It has basic functions that cover most of the applications.
  3. It compensates for outside temperatures that allow for more accurate detection.
  4. It has a pulse function of 1 s ON/ 9 s OFF.
  5. It has a dual neutral connection terminal for easier installation.
  6. It has adjustable parameters for timing and light sensitivity.
  7. It includes a field detection limit that allows the detection of cancelation at a specific point within the detection area.
  8. It includes zero-crossing detection features, needed for control of LED, fluorescence or low-energy lighting load, etc.

Specifications of PIR Motion sensor, model no. VAC-Circumat+ for offices, halls, and corridors.

  1. It is a ceiling surface mounted.
  2. The power supply is 230 V ac ± 10 %.
  3. The nominal frequency is 230 V ac and 50 Hz.
  4. The power consumption is 5.2 VA (0.8 W).
  5. It has a switching capacity of µ 6 A / 230 V~ cosφ = 1.
  6. It has a 360° detection angle.
  7. With the detection field of up to 7 m diameter at 2.5 m height and up to 9 m diameter at 3 m height.
  8. It has a 3 to 2000 lux brightness range.
  9. The recommended installation height is up to 4 m (ideal between 2.2 and 4 m).
  10. The wire cross-section is 0.75 mm² to 1.5 mm².
  11. The timing range is 10 to 30 minutes.
  12. The degree protection is IP 20 according to EN 60529.
  13. It has an operating range of  -20 up to +40°C.
  14. The maximum recommended load for Incandescents is 1200 W
  15. The maximum recommended load for Fluorescent is 400 VA
  16. The maximum recommended load for Low voltage halogen (12 V AC) is 1000 VA
  17. The maximum recommended load for Halogen (230 V AC) is 1200 W
  18. The maximum recommended load for Low consumption lamps is 500 VA
  19. The maximum recommended load for Downlights is 500 VA
  20. The maximum recommended load for LED is 500 VA
  21. It has a net weight of 105 grams.

We supply these PIR Motion sensor for  offices, halls, and corridors in the USA, UK, Germany, France, Netherlands, Spain, Switzerland, Sweden, and other European countries. Also, we supply these PIR Motion sensors for  box rooms, landings, and most indoor applications in the Middle East and other Asian countries including India, Pakistan, Afghanistan, Bangladesh, Singapore, etc.