FacebookTwitterLinkedinYoutubeWhatsappWhatsapp
Share

PIR Motion sensor is used for automatic switching off fans

////PIR Motion sensor is used for automatic switching off fans

The VAC-PS1003 infra passive switches are designed for touchless control of powered appliances. The sensor receives invisible infrared radiation. It detects the change caused by the movement of a person in the detection zone, the output is switched on. If the movement stops, the output will switch off after a set period. The device allows time-limited lighting to save energy. It is suited mainly for lighting control of corridors, stairs, toilets, garages, and other rooms. It can also be used for automatic switching off fans, flushing of toilet bowls, and at places with a higher level of hygienic requirements.

Applications of PIR Motion Sensor, model no. VAC-PS1003

The PIR Motion sensor, model no. VAC-PS1003 is useful for the following applications:

  1. It is used for halls and corridors.
  2. It is used for stairs and toilettes.
  3. It is used for cellars and garages.
  4. It is used for automatic switching off fans.
  5. It is used in places with a higher level of hygienic requirements.

Features of PIR Motion sensor, model no. VAC-PS1003.

  1. It is designed for surface mounting installation.
  2. It allows time-limited lighting to save energy.
  3. It has 3 adjustable elements for sensitivity, light, and timing.
  4. It has a switch-off delay that can be set approx. from 5 sec to 10 min.
  5. The switch sensor is very sensitive that can easily detect the heat of moving people.

Specifications of PIR Motion sensor, model no. VAC-PS1003 for corridors, stairs, and toilettes.

  1. It is a ceiling surface mounted.
  2. The power supply is 230 V ac ± 10 %.
  3. The nominal frequency is 230 V ac and 50 Hz.
  4. It has a relay output signal.
  5. The ingress protection is IP40.
  6. It has a maximum switching power of 2300 W (VA|A).
  7. It has a maximum operating temperature of 35°C.
  8. It has a minimum operating temperature of -10°C.
  9. It has a switch-off delay that can be set approx. from 5 sec to 10 min.
  10. The response threshold is 1 až / to 1000 lx.

We supply these PIR Motion sensor for corridors, stairs, and toilettes in the USA, UK, Germany, France, Netherlands, Spain, Switzerland, Sweden, and other European countries. Also, we supply these PIR Motion sensors for cellars, garages, and other rooms in the Middle East and other Asian countries including India, Pakistan, Afghanistan, Bangladesh, Singapore, etc.